HID Grow Lights (27)

The Sunmaster 600W High Pressure Sodium Lamp (HPS) will give you 10% more light than a standard HPS lamp and provides more energy essential for optimized photosynthesis. It is ideal for Metal Halide conversion lamps and the red output enhances stem elongation and flowering. Rated Light Output (Lumens @ 100 hours): 90000 Lamp Lumens per Watt: 150 Rated Life (Hrs @ 10Hr./Start): 32000 Correlated Colour Temperature (K): 2000 Chromaticity (CIE - X Y): 525, 425 Colour Rendering Index (CRI) or (Ra): 25 Typical Warm Up Time (Minutes): 6 Typical Hot Restart Time (Minutes): 1

Gavita Pro 1000w e-series DE is part of the Gavita Pro line e-series, next generation professional grow light solutions. This double ended fixture is capable of being remote controlled by the Gavita Master Controller. The ‘e’ in ‘e-series’ stands for external control. These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. They improved the electronics and changed the way the ballast is built, by mounting the PCB (Printed Circuit Board) and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life. The new design of the housing even increases that effect.   We are an authorised Gavita distributor & dealer in South Africa. Specifications: Input Voltage - 240 Volt Input Current at 100% - 4.4 Amps Input Current at 110% - 6.1 Amps Input Power at 100% - 1050 Watt Input Power at 110% - 1200 Watt Lamp - Gavita Pro Plus 1000 W 400V EL DE HPS K12 x 30S The fixture comprises of a ballast, reflector and lamp in one complete compact package. Made according to horticultural standards, the housing of the ballast is sealed and contains a gore-tex® plug to ventilate the housing, while keeping dust and humidity out. Ballast output is either controlled by the Gavita Master controllers, or an external switch, allowing it to be adjusted to 600, 750, 825, 1000W, and 1150W boosted output. The Master Controller can centrally control the output hundreds of fixtures in a range between 500 and 1150W output power. Using the Master controller safeguards your valuable crop by the added auto-dim and auto-shutdown features which completely automates your light control.  The compact complete fixture contains a lamp, HR96 reflector and horticultural quality ballast in one comprehensive package. The higher output and added efficiency of the industry standard HR96 reflector make this the workhorse of the family. The spread of the Pro 1000 equipped with the HR96 DE reflector is about 4 x 6 ft (110x180cm) at 3 ft distance in overlapping plans, providing light levels of up to 1000 µmol s-1 m-2. The fixture’s light source is a Gavita Pro Plus 1000W double ended HPS lamp, generating 2100 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year.Mounting is easy because the fixture is balanced and only requires two hanging points. For c-profile installations we have convenient brackets available.   Features and Benefits: Complete Fixture - The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All Gavita's fixtures are FCC compliant. Horticultural Design - Their fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality. 400V lamp technology for high frequency electronic ballast - The high voltage lamp technology results in a better efficiency of the arc tube: more light for the same power (10-25% more than traditional single ended lamps)! These lamps are best suited for extreme high frequency electronic ballasts, creating a stable arc without acoustic resonance, assuring optimal output and a long lamp life. The smaller arc tube and outer balloon require the lamp to be nitrogen filled instead of vacuum, which prohibits it to be air cooled. Air cooling of the lamp results in lower lamp temperature, which results in sub-optimal light output, up to 15% less than specified. Therefore these lamps are not suitable for direct air cooled fixtures. Replaceable Reflector - The bracket is designed to be able to change your reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. It's recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment. Controllable Output - With the output dial you can select an output power between 600 and 1150W, adjusting your light to changing circumstances or grow phases. Do remember though that every new lamp needs to burn in at 100% for at least 100 hours to stabilize before you dim or boost it. Failing to do so can lead to start-up problems when lower output power is selected and decreased output. Double Ended Lamp - These Double ended HPS lamps are the most efficient HPS lamps available. Double ended lamps have the advantage that they are always in the focal point of the reflector, there is no frame wire in the lamp which results in less light interception, and the lamp is very small in diameter which prevents reflected light to be intercepted by the lamp in the reflector. High Frequency Electronic Ballast - There is no such thing as a universal ballast. You will get the optimal output when you match a lamp and ballast which are designed for each other. Gavita's ballasts are designed to power our horticultural double ended lamps at exactly the right high frequency and power for optimal and stable output, and a long light maintenance. Their ballasts are only suitable for high frequency HPS lamps as specified in the product manual. Soft Start - Unlike magnetic ballasts their electronic ballasts never use more power than their specified power during the start-up sequence. Lamps reach their full power much quicker though than with a magnetic ballast. No in-rush Current - The e-series fixtures are constantly connected to your mains supply, just like a television that is on stand-by. Because of that it never creates a high inrush power when switching on. You can fire-up all your lamps safely. No moving parts, optimal thermal management - Gavita ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Their housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics. Sealed housing with Gore-tex ventilation plug - Electronics are very sensitive to moisture. Therefore their ballasts are completely sealed and equipped with a ventilation plug. When the ballast is switched on and heats up, the air inside the ballast expands and is vented out through the ventilation plug to protect the seals. When the ballast is switched off and the air inside the ballast cools down, the Gore-tex ventilation plug only lets in the air, and keeps out the dust and moisture, safeguarding your sensitive electronics. Status LED - The Status LED provides information about the operating status of the ballast. It senses connection with the controller, indicates a starting lamp, end of life, over temperature, too high input voltage, too low input voltage and it even has a memory for alarms. Miro aluminum reflector - The HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration. Soft Dim - When adjusting the output of your fixture the output power will very gradually change, protecting your lamp. It can take a minute per step, making this process so gradual that your eyes can hardly see it. Rest assured, they will dim. Suitable for Gavita Master Controllers - Their e-series ballasts can be remote controlled by Gavita's Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When your climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems. Plug & Play installation - Connect your fixtures to the Master Controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

Gavita Pro 600/750e DE is part of the Gavita Pro line e-series, their next generation professional grow light solutions. Gavita were the first to launch a double ended 1000W HPS lamp in this market, and were also the first to introduce a double ended 750W HPS lamp. This lamp bridges the gap between a 600W single ended, and a 1000W double ended fixture. The ‘e’ in ‘e-series’ stands for external control. These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Official Gavita accessories! We are an authorised Gavita distributor & dealer in South Africa. Specifications: Input Voltage - 240 Volt Input Current at 100% - 3.5 Amps Input Current at 110% - 3.9 Amps Input Power at 100% - 795 Watt Input Power at 110% - 870 Watt Lamp - Gavita Pro 750 W 400V EL DE HPS K12 x 30S In many rooms you just don’t have the height to run a 1000W fixture at 100%, and in other rooms you don’t need the intensity. Running a 1000W lamp at 750W all the time is a not a desirable situation as the lamp does not come to its full efficiency and the spectrum deteriorates. In those situations the 6/750 DE FLEX is the ideal solution, more efficient, cheaper and with a much better spectrum. They call it the 6/750 as the efficiency of the lamp, dimmed to 600W, is still really good: as good as any other 600W industry standard HPS lamp. With the 750W lamp you can come almost a foot closer to your crop (a bit less in overlapping plans). The fixture comprises of a ballast, reflector and lamp in one complete compact package. Made according to horticultural standards, the housing of the ballast is sealed and contains a gore-tex® plug to ventilate the housing, while keeping dust and humidity out. Ballast output is either controlled by the Gavita Master controllers, or an external switch, allowing it to be adjusted to 400, 500, 600, 750W and 825W boosted output. The Master Controller can centrally control the output hundreds of fixtures in a range between 375 and 825W output power. Using the Master controller safeguards your valuable crop by the added auto-dim and auto-shutdown features which completely automates your light control. The high frequency ballast was specifically designed for the Gavita double ended HPS lamp, resulting in an accurate, optimal output, a stable burning lamp and a better light maintenance over time. The ballast is not suitable to run Metal Halide lamps. The spread of the Pro 6//750 with the HR96 DE reflector is about 3x4.5 ft (90 x 135cm) at 2.5 ft distance in overlapping plans, providing light levels of up to 1000 µmol s-1 m-2.The fixture’s light source is a Gavita Pro 750W double ended HPS lamp, generating 1450 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year.Mounting is easy because the fixture is balanced and only requires two hanging points. Features and Benefits: Complete Fixture - The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All Gavita's fixtures are FCC compliant. Horticultural Design - Their fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality. 400V lamp technology for high frequency electronic ballast - The high voltage lamp technology results in a better efficiency of the arc tube: more light for the same power (10-25% more than traditional single ended lamps)! These lamps are best suited for extreme high frequency electronic ballasts, creating a stable arc without acoustic resonance, assuring optimal output and a long lamp life. The smaller arc tube and outer balloon require the lamp to be nitrogen filled instead of vacuum, which prohibits it to be air cooled. Air cooling of the lamp results in lower lamp temperature, which results in sub-optimal light output, up to 15% less than specified. Therefore these lamps are not suitable for direct air cooled fixtures. Replaceable Reflector - The bracket is designed to be able to change you reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. Gavita recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment. Controllable Output - With the output dial you can select an output power between 400 and 825W, adjusting your light to changing circumstances or grow phases. Do remember though that every new lamp needs to burn in at 100% for at least 100 hours to stabilize before you dim or boost it. Failing to do so can lead to start-up problems when lower output power is selected and decreased output. Double Ended Lamp - These Double ended HPS lamps are the most efficient HPS lamps available. Double ended lamps have the advantage that they are always in the focal point of the reflector, there is no frame wire in the lamp which results in less light interception, and the lamp is very small in diameter which prevents reflected light to be intercepted by the lamp in the reflector. High Frequency Electronic Ballast - There is no such thing as a universal ballast. You will get the optimal output when you match a lamp and ballast which are designed for each other. Gavita's ballasts are designed to power their horticultural double ended lamps at exactly the right high frequency and power for optimal and stable output, and a long light maintenance. Their ballasts are only suitable for high frequency HPS lamps as specified in the product manual. Soft Start - Unlike magnetic ballasts their electronic ballasts never use more power than their specified power during the start-up sequence. Lamps reach their full power much quicker though than with a magnetic ballast. No in-rush Current - The e-series fixtures are constantly connected to your mains supply, just like a television that is on stand-by. Because of that it never creates a high inrush power when switching on. You can fire-up all your lamps safely. No moving parts, optimal thermal management - Gavita ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Their housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics. Sealed housing with Gore-tex ventilation plug - Electronics are very sensitive to moisture. Therefore their ballasts are completely sealed and equipped with a ventilation plug. When the ballast is switched on and heats up, the air inside the ballast expands and is vented out through the ventilation plug to protect the seals. When the ballast is switched off and the air inside the ballast cools down, the Gore-tex ventilation plug only lets in the air, and keeps out the dust and moisture, safeguarding your sensitive electronics. Status LED - The Status LED provides information about the operating status of the ballast. It senses connection with the controller, indicates a starting lamp, end of life, over temperature, too high input voltage, too low input voltage and it even has a memory for alarms. Miro aluminum reflector - The HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration. Soft Dim - When adjusting the output of your fixture the output power will very gradually change, protecting your lamp. It can take a minute per step, making this process so gradual that your eyes can hardly see it. Rest assured, they will dim. Suitable for Gavita Master Controllers - Their e-series ballasts can be remote controlled by the Gavita Master Controllers. They replace your timers and contactors, and put you in full control of your ballasts. You can centrally adjust the output of your ballasts, even with sunrise and sunset settings. Moreover they protect your crop by two temperature safety features: When your climate control is not able to maintain the optimal temperature your master controller will automatically dim your lights. In case of a climate control failure they will switch off your lights, protecting your valuable crop and preventing overheating problems. Plug & Play installation - Connect your fixtures to the master controller with the standard controller cables provided with the controller and the fixture. It’s all plug and play: you do not need a screwdriver. Gavita provides original accessories if you require replacements or different length controller cables.

Venture Lighting 600W High Pressure Sodium Lamp. The Venture range of Uni-form Pulse Start Lamps represent the pinnacle of High Pressure Sodium lamp technology. Venture Lighting introduced most of the HID types currently in use around the world, and their innovations continue to lead the industry. Venture High Pressure Sodium lamps are high output horticultural grow lamps, specifically designed for flower and fruit development. Rated Light Output (Lumens @ 100 hours): 90000 Correlated Colour Temperature (K): 2000 Colour Rendering Index (CRI) or (Ra): 25

The E40 Lamp Holder is made from high-quality materials and may be used with minimal training. To begin, just attach your light to the holder by tightening its screw. The holder is adaptable to a wide range of hydroponic setups due to its compatibility with both high-pressure sodium and metal halide lamps. If you're looking for a high-quality lamp holder for your hydroponic lighting system, look no further than the E40 Lamp Holder. This durable product is built to last and is aimed at horticulturists who wish to maximize the efficiency of their hydroponic setups. The E40 Lamp Holder's longevity is a notable benefit. It can take the heat and humidity of hydroponic growing environments. This means it will continue to serve its purpose reliably for a very long time, even in harsh cultivation conditions. The E40 Lamp Holder is built to last, but its ease of installation is just as important. The E40 screw base is the standard in the hydroponics business. This means that it may easily be integrated into your existing hydroponic setup without the need for any additional adapters or modifications.

Havells 400W Metal Halide (MH) Lamp – Ideal spectrum for vegetative growth. Rated Light Output (Lumens @ 100 hours): 36000 Lamp Lumens per Watt: 90 Rated Life (Hrs @ 10Hr./Start): 15000 Correlated Colour Temperature (K): 6400 Chromaticity (CIE - X Y): 385,390 Colour Rendering Index (CRI) or (Ra): 68 Typical Warm Up Time (Minutes): 3-5 Typical Hot Restart Time (Minutes): 5-10

Sunmaster 600W Metal Halide (MH) Lamp – Ideal spectrum for vegetative growth. Rated Light Output (Lumens @ 100 hours): 55000 Lamp Lumens per Watt: 92 Rated Life (Hrs @ 10Hr./Start): 12000V / 9000H Correlated Colour Temperature (K): 4000 Chromaticity (CIE - X Y): 385,390 Colour Rendering Index (CRI) or (Ra): 68 Typical Warm Up Time (Minutes): 3-5 Typical Hot Restart Time (Minutes): 5-10

The Luxx Lighting 1000 DE HID light boasts the strength and ability to function as a primary flowering lamp and the capability of vegging in a high-intensity environment. We bring the power to your flower! Bulbs are included (Luxx Lighting 1000w HPS 2000k) Over 95% high reflective aluminum 10ft 240v power cord (NEMA 6-15P) Controller compatible (SOLD SEPARATELY) 3 Year warranty Consider adding the Luxx Lighting 630W CMH Grow Light for the vegetative grow room or as supplemental lights in flowering.  High-Performance Grow Lights Designed in LA - Available for sale in South Africa Compatible with both the Luxx NX-1 and the Gavita EL1/EL2 controllers.